CALL US: 704-827-7400
Notice: Complete systems built to order  |  Small parts ship in 1–2 business days.
3-Flavor Soda Gun System w/ Remote Chiller (sg3000)
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller
Image of 3-Flavor Soda Gun System w/ Remote Chiller

3-Flavor Soda Gun System w/ Remote Chiller

SKU: sg3000
$3,480.00
  • Remote chiller: no ice needed
  • Dispenses 3 flavors, set up for the syrup brand you choose
  • Pre-assembled and labeled for easy installation
  • 1-year warranty, with phone and email support while you install
Complete three flavor home soda gun system with remote cooling unit. This system is set up to dispense three (3) flavors of bag-in-box syrup. Choose any combination of flavors you plan on dispensing and we will set the system to accommodate that manufacturer's product at no additional cost.

Read More

Built to order. Allow 3–4 weeks for production, plus transit time. Questions? Call 704-827-7400.

Overview

Complete three flavor home soda gun system with remote cooling unit. This system is set up to dispense three (3) flavors of bag-in-box syrup. Choose any combination of flavors you plan on dispensing and we will set the system to accommodate that manufacturer's product at no additional cost. It's very simple to hook-up (we've done all the work for you). The lines have been professionally pre-assembled and labeled for easy installation.

The remote cooling unit features built-in refrigerated cooling. This type of heat transfer cools a water bath that the soda water and syrup lines run through, eliminating the need for a cold plate or ice.

What's included

  • NEW 8-Button Wunder-Bar Soda Gun
  • NEW Remote ChillerDimensions: 10" W x 20" D x 23.5" H
  • NEW Carbonator
  • NEW Three (3) Syrup Pumps and Mounting Bracket
  • NEW Three (3) BIB Connectors
  • NEW Complete Set of CO2 Regulators
  • NEW 5 lb. CO2 Tank
  • NEW High Pressure Hosing
  • Completely Pre-Assembled Ready To Install
  • Water Source Tubing & Connectors Not included
  • See Shipping Rates in Shopping Cart

Package includes

Spec sheets and manuals

What you'll need to supply

  • Water supply
  • Bag-in-Box (BIB) syrup
  • CO2 (carbon dioxide) gas
  • Electricity

Specifications

System components

Soda gun whip diameter (inches)1 1/8
Carbonator dimensions (inches)14 W x 13 D x 10.5 H
Carbonator electrical requirements6.5 AMP, 1/3 HP, 115V AC
CO2 tank dimensions (inches)17 ⅜ H x 5 ¼
CertificationsNSF, UL

Remote Chiller

Dimensions: Width10.375" (264 mm)
Dimensions: Depth19.688" (500 mm)
Dimensions: Height23.5" (597 mm)
Weight: Shipping108 lbs (49 kg)
Weight: With water145 lbs (66 kg)
Electrical115VAC/60Hz, 7AMPs
FittingsStainless steel inlet and outlet labeled 3/8" barb
Compressor1/4 hp
Motors: Agitator15 W
Motors: Condenser Fan9 W

Not included

Water Source Tubing & ConnectorsNot included

Videos

Reviews

Add to your order

Add a brix kit to your system order. A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. It includes a syrup separator and a ratio cup, and brixing takes only a few minutes per valve for a consistent flavor. When you buy a complete system and a brix kit, we supply the syrup separator that fits your valve type or soda gun.

Questions about this item? Call or send us a message and we'll help you pick the right setup and get it installed.